반응 메커니즘, 반응 경로, 생물 반응과 생물 반응기Reaction Mechanisms, Pathways, Bioreactions, and Bioreactors
Fogler, Elements of Chemical Reaction Engineering, Chapter 9. 슬라이더를 움직이면 그래프가 실시간으로 반응합니다.Fogler, Elements of Chemical Reaction Engineering, Chapter 9. Move the sliders to see the graphs respond in real time.
Active intermediate와 비기본 속도식Active Intermediates and Nonelementary Rate Laws
많은 반응의 속도식은 정수 차수를 따르지 않는다. 아세트알데히드 분해는 $-r = kC^{3/2}$이고, HBr 생성의 속도식은 분자와 분모에 농도 항이 함께 들어간다. 이런 속도식은 하나 이상의 active intermediate가 들어 있는 여러 elementary reaction이 이어진 결과이다. Active intermediate는 생기는 즉시 반응해 버리는 고에너지 분자여서 농도가 매우 낮다. 충돌로 활성화된 분자 $A^*$, free radical, 이온성 중간체, 효소-기질 복합체가 여기에 속한다.Many rate laws do not follow integer orders. Acetaldehyde decomposition follows $-r = kC^{3/2}$, and the HBr rate law has concentration terms in both numerator and denominator. Such laws result from a sequence of elementary reactions that contain at least one active intermediate, a high-energy molecule that reacts almost as fast as it forms and therefore stays at very low concentration. Collisionally activated molecules $A^*$, free radicals, ionic intermediates and enzyme-substrate complexes are examples.
Active intermediate는 생성 속도와 소모 속도가 거의 같으므로 순생성 속도를 0으로 놓는다. 이것이 pseudo-steady-state hypothesis(PSSH)이다. 중간체가 $n$개의 반응에 들어 있으면 각 반응의 생성 속도를 모두 더한 값이 0이다. 이 조건으로 중간체 농도를 반응물 농도로 풀어 속도식에서 소거한다.An active intermediate is consumed about as fast as it is made, so its net rate of formation is set to zero. This is the pseudo-steady-state hypothesis (PSSH). If the intermediate appears in $n$ reactions, the sum of its formation rates over all reactions is zero. That condition is solved for the intermediate concentration, which is then eliminated from the rate law.
$$r_{A^*}=\sum_{i=1}^{n} r_{iA^*}=0$$
Azomethane(AZO)의 기체상 분해 $(\mathrm{CH_3})_2\mathrm{N_2}\rightarrow \mathrm{C_2H_6}+\mathrm{N_2}$가 예이다. 실험에서 압력이 1 atm보다 높으면 1차, 50 mmHg보다 낮으면 2차로 관측된다. 이를 설명하는 메커니즘은 세 단계이다. 두 AZO의 충돌로 $\mathrm{AZO}^*$가 생기고(속도상수 $k_1$), $\mathrm{AZO}^*$가 충돌로 비활성화되며($k_2$), $\mathrm{AZO}^*$가 자발적으로 분해한다($k_3$). $\mathrm{AZO}^*$에 PSSH를 쓰면 농도가 다음과 같이 나온다.Gas-phase azomethane (AZO) decomposition $(\mathrm{CH_3})_2\mathrm{N_2}\rightarrow \mathrm{C_2H_6}+\mathrm{N_2}$ is the example. Experiments show first order above 1 atm and second order below 50 mmHg. The mechanism that explains this has three steps: two AZO molecules collide to form $\mathrm{AZO}^*$ ($k_1$), $\mathrm{AZO}^*$ is deactivated by collision ($k_2$), and $\mathrm{AZO}^*$ decomposes spontaneously ($k_3$). Applying the PSSH to $\mathrm{AZO}^*$ gives its concentration below.
농도가 높아 $k_2C_{\mathrm{AZO}}\gg k_3$이면 $r\approx (k_1k_3/k_2)C_{\mathrm{AZO}}$로 1차이고, 농도가 낮아 $k_2C_{\mathrm{AZO}}\ll k_3$이면 $r\approx k_1C_{\mathrm{AZO}}^2$로 2차이다. 반응 차수가 바뀌는 이유는 활성화된 분자가 분해하기 전에 충돌로 비활성화될 확률이 농도에 따라 달라지기 때문이다. 이 속도식 유도는 Table 9-1의 일곱 단계를 따른다.At high concentration, $k_2C_{\mathrm{AZO}}\gg k_3$ and $r\approx (k_1k_3/k_2)C_{\mathrm{AZO}}$, first order. At low concentration, $k_2C_{\mathrm{AZO}}\ll k_3$ and $r\approx k_1C_{\mathrm{AZO}}^2$, second order. The order changes because the chance that an activated molecule is deactivated by collision before it decomposes depends on concentration. The derivation follows the seven steps of Table 9-1.
속도식 유도 순서: (1) active intermediate를 정한다. (2) 메커니즘을 세운다. (3) 각 단계를 elementary reaction으로 본다. (4) 생성물과 중간체의 속도식을 쓴다. (5) 중간체의 순생성 속도를 0으로 놓는다. (6) 연립하여 중간체 농도를 소거한다. (7) 실험과 맞지 않으면 메커니즘을 바꾼다.Steps to deduce a rate law: (1) choose the active intermediate, (2) propose a mechanism, (3) treat each step as elementary, (4) write rate laws for product and intermediate, (5) set the intermediate's net rate to zero, (6) solve simultaneously to eliminate its concentration, (7) change the mechanism if the result disagrees with experiment.
연쇄 반응(chain reaction): 세 단계로 이루어진다. 개시(initiation)에서 active intermediate가 생기고, 전파(propagation)에서 중간체가 반응물이나 생성물과 반응해 또 다른 중간체를 만들며, 종결(termination)에서 중간체가 비활성화되어 생성물이 된다. 에탄 크래킹과 smog 생성이 예이며 중간체마다 PSSH를 쓴다.Chain reaction: three stages. Initiation forms an active intermediate, propagation lets an intermediate react with reactant or product to form another intermediate, and termination deactivates the intermediate into products. Ethane cracking and smog formation are examples, and the PSSH is applied to each intermediate.
PSSH가 맞는 조건: 중간체 소모 속도상수가 생성 속도상수보다 충분히 커야 한다. 아래 첫 번째 그림에서 $k_2/k_1$이 어느 값부터 오차가 5% 아래가 되는지 확인한다.When the PSSH holds: the consumption rate constant of the intermediate must be much larger than its formation rate constant. In the first figure below, find the $k_2/k_1$ at which the error drops under 5%.
예측: $A\xrightarrow{k_1}I\xrightarrow{k_2}P$에서 $k_2/k_1$을 키우면 중간체 $I$의 최대 농도는 어떻게 될까?Predict: in $A\xrightarrow{k_1}I\xrightarrow{k_2}P$, what happens to the maximum concentration of $I$ as $k_2/k_1$ grows?
목표: 그림 아래 막대의 핸들을 좌우로 끌어 $k_2/k_1$을 바꾸고, $t=2/k_1$에서 PSSH 오차를 5% 아래로 만드세요.Goal: drag the handle on the bar below the plot to change $k_2/k_1$, and bring the PSSH error at $t=2/k_1$ under 5%.
$k_2/k_1$-
$C_I$ 최댓값 ($C_{A0}$ 기준)Max $C_I$ (of $C_{A0}$)-
PSSH 오차PSSH error-
$k_1=1$ 기준 시간에서 정확해 $C_I=C_{A0}(e^{-t}-e^{-rt})/(r-1)$과 PSSH 해 $C_I=C_A/r$를 비교한다($r=k_2/k_1$). 위쪽 그림에서 $r$이 크면 $C_I$는 0 근처에 머물고, 아래쪽 비는 $r/(r-1)$로 수렴한다. 이 비가 1에 가까워야 PSSH를 쓸 수 있으며, 오차는 $1/(r-1)$이므로 5% 아래는 $r>21$에서 얻는다.In time units of $1/k_1$, the exact solution $C_I=C_{A0}(e^{-t}-e^{-rt})/(r-1)$ is compared with the PSSH result $C_I=C_A/r$ ($r=k_2/k_1$). In the upper plot a large $r$ keeps $C_I$ near zero, and the lower ratio converges to $r/(r-1)$. The ratio must be close to 1 for the PSSH to apply; the error is $1/(r-1)$, so under 5% requires $r>21$.
Figure 9.2Azomethane 분해에서 겉보기 반응 차수의 변화Apparent Reaction Order Change in Azomethane Decomposition
$r=k_1C^2/(1+C/K)$에서 겉보기 차수는 $n=1+K/(K+C)$이다. $C\ll K$이면 2에, $C\gg K$이면 1에 가까워진다. $k_1=1$의 상대 단위로 그렸고, 전이 농도 $K$는 $k_3/k_2$의 비로만 정해진다.From $r=k_1C^2/(1+C/K)$, the apparent order is $n=1+K/(K+C)$. It approaches 2 for $C\ll K$ and 1 for $C\gg K$. The plot uses relative units with $k_1=1$; the crossover $K$ depends only on the ratio $k_3/k_2$.
Section 9.2
효소 반응의 기초Enzymatic Reaction Fundamentals
효소는 기질(substrate)을 화학적으로 변환하는 단백질이며 촉매되지 않은 반응보다 $10^3$배부터 $10^{17}$배까지 빠르게 한다. 효소는 반응에서 소모되지 않고 평형을 바꾸지도 않는다. 효소는 활성화 에너지가 낮은 다른 경로를 제공하며, 그 경로에 효소-기질 복합체 $E\cdot S$라는 active intermediate가 들어 있다. 효소는 기질 선택성이 높아서 원하지 않는 부산물이 적고, pH 4부터 9, 온도 약 25부터 70 ˚C의 온화한 조건에서 작동한다.An enzyme is a protein that transforms a substrate chemically and makes the reaction $10^3$ to $10^{17}$ times faster than the uncatalyzed one. It is not consumed and does not change the equilibrium. It provides a path with a lower activation energy, and that path contains an active intermediate, the enzyme-substrate complex $E\cdot S$. Enzymes are highly specific, so unwanted by-products are few, and they work under mild conditions, pH 4 to 9 and roughly 25 to 70 ˚C.
기본 메커니즘은 $E+S\rightleftharpoons E\cdot S\rightarrow P+E$이다. 복합체에 PSSH를 쓰고 총 효소 농도 $E_t=E+E\cdot S$로 효소 수지를 세우면 Michaelis-Menten 식이 나온다. $V_{max}=k_3E_t$는 모든 효소가 복합체로 있을 때의 최대 속도이고, Michaelis 상수 $K_M$은 속도가 $V_{max}$의 절반이 되는 기질 농도이다. 저농도에서는 $C_S$에 비례하는 1차, 고농도에서는 $V_{max}$에 가까운 0차이다.The basic mechanism is $E+S\rightleftharpoons E\cdot S\rightarrow P+E$. Applying the PSSH to the complex and balancing total enzyme $E_t=E+E\cdot S$ gives the Michaelis-Menten equation. $V_{max}=k_3E_t$ is the maximum rate when all enzyme is present as complex, and the Michaelis constant $K_M$ is the substrate concentration at which the rate is half of $V_{max}$. The rate is first order in $C_S$ at low concentration and nearly zero order, close to $V_{max}$, at high concentration.
$V_{max}$와 $K_M$은 $1/(-r_S)$ 대 $1/C_S$ 그래프, 곧 Lineweaver-Burk 그래프의 절편과 기울기에서 구한다. 이 그래프는 y절편이 $1/V_{max}$, 기울기가 $K_M/V_{max}$, x절편이 $-1/K_M$인 직선이다. 요소를 분해하는 urease(Example 9-2)는 $V_{max}=1.33$ mol/(dm³ s), $K_M=0.0266$ mol/dm³이다. 회분 반응기에서 전화율 $X$에 도달하는 시간은 다음과 같다.$V_{max}$ and $K_M$ come from the intercept and slope of a plot of $1/(-r_S)$ versus $1/C_S$, the Lineweaver-Burk plot. It is a line with y-intercept $1/V_{max}$, slope $K_M/V_{max}$ and x-intercept $-1/K_M$. For urease decomposing urea (Example 9-2), $V_{max}=1.33$ mol/(dm³ s) and $K_M=0.0266$ mol/dm³. The time to reach conversion $X$ in a batch reactor is given below.
Vmax의 효소 농도 의존: $V_{max}=k_3E_t$이므로 효소 농도를 두 배로 하면 $V_{max}$가 두 배가 된다. $K_M$은 속도상수만의 함수라서 바뀌지 않는다.Enzyme concentration and Vmax: since $V_{max}=k_3E_t$, doubling the enzyme doubles $V_{max}$. $K_M$ depends only on rate constants and does not change.
다른 선형화: Hanes-Woolf 그래프와 Eadie-Hofstee 그래프도 같은 식에서 나온다. 저농도 데이터의 오차가 Lineweaver-Burk 그래프에서 크게 보이므로 비선형 회귀(Polymath)를 함께 쓴다.Other linearizations: Hanes-Woolf and Eadie-Hofstee plots come from the same equation. Errors in low-concentration data are magnified in a Lineweaver-Burk plot, so nonlinear regression (Polymath) is used alongside.
Section 9.3
효소 반응의 저해Inhibition of Enzyme Reactions
저해제(inhibitor)는 효소 활성을 낮추는 물질이며, 독이나 약물이 효소 하나를 저해하는 방식이 이에 해당한다. 저해는 세 유형으로 나뉜다. 경쟁 저해(competitive)에서는 저해제 $I$가 기질과 같은 활성 부위에 결합해 $E\cdot I$를 만든다. 반경쟁 저해(uncompetitive)에서는 저해제가 효소-기질 복합체에만 결합해 비활성 $I\cdot E\cdot S$를 만든다. 비경쟁 저해(noncompetitive, mixed)에서는 효소와 복합체 어느 쪽에도 결합해 비활성 형태가 된다.An inhibitor lowers enzyme activity; many poisons and drugs act by inhibiting a single enzyme. There are three types. In competitive inhibition the inhibitor $I$ binds the same active site as the substrate and forms $E\cdot I$. In uncompetitive inhibition the inhibitor binds only the enzyme-substrate complex and forms an inactive $I\cdot E\cdot S$. In noncompetitive (mixed) inhibition it binds either the free enzyme or the complex, and the enzyme becomes inactive.
저해 유형은 Lineweaver-Burk 그래프에서 구별한다. 경쟁 저해에서는 $I$를 늘려도 y절편 $1/V_{max}$가 그대로이고 기울기만 커진다. 반경쟁 저해에서는 기울기가 같고 y절편만 올라가 직선이 서로 평행하다. 비경쟁 저해에서는 기울기와 y절편이 같은 비율로 커져 x절편 $-1/K_M$이 그대로이다. 식에서 $K_I$는 저해제 해리상수이고 $i=C_I/K_I$로 놓는다.The type is told apart on a Lineweaver-Burk plot. In competitive inhibition the y-intercept $1/V_{max}$ stays and only the slope grows as $I$ rises. In uncompetitive inhibition the slope stays and the y-intercept rises, so the lines are parallel. In noncompetitive inhibition slope and y-intercept grow by the same factor, so the x-intercept $-1/K_M$ stays. In the equations $K_I$ is the inhibitor dissociation constant and $i=C_I/K_I$.
경쟁 저해: $K_M^{app}=K_M(1+i)$, $V_{max}^{app}=V_{max}$. 기질 농도를 충분히 높이면 저해가 극복된다. 직선들이 y축 위 한 점에서 만난다.Competitive: $K_M^{app}=K_M(1+i)$, $V_{max}^{app}=V_{max}$. A high enough substrate concentration overcomes the inhibition. The lines meet at one point on the y-axis.
반경쟁 저해: $K_M^{app}=K_M/(1+i)$, $V_{max}^{app}=V_{max}/(1+i)$. 기질을 늘려도 극복되지 않는다. 직선들이 평행하다.Uncompetitive: $K_M^{app}=K_M/(1+i)$, $V_{max}^{app}=V_{max}/(1+i)$. More substrate does not overcome it. The lines are parallel.
비경쟁 저해: $K_M^{app}=K_M$, $V_{max}^{app}=V_{max}/(1+i)$. 중금속 이온이 대표적인 저해제이다. 직선들이 x축 위 $-1/K_M$에서 만난다.Noncompetitive: $K_M^{app}=K_M$, $V_{max}^{app}=V_{max}/(1+i)$. Heavy metal ions are typical inhibitors. The lines meet on the x-axis at $-1/K_M$.
기질 저해: 기질이 너무 많으면 속도가 오히려 감소하는 경우로, $-r_S=V_{max}C_S/(K_M+C_S+C_S^2/K_{SI})$이다. 속도가 최대가 되는 기질 농도는 $\sqrt{K_MK_{SI}}$이다.Substrate inhibition: at high substrate the rate falls, $-r_S=V_{max}C_S/(K_M+C_S+C_S^2/K_{SI})$. The rate peaks at $C_S=\sqrt{K_MK_{SI}}$.
Figure 9.3저해제 농도에 따른 Michaelis-Menten 곡선과 Lineweaver-Burk 직선Michaelis-Menten Curves and Lineweaver-Burk Lines versus Inhibitor Concentration
$V_{max}$ (mol/(dm³ s))-
$K_M$ (mol/dm³)-
$i=C_I/K_I$-
$V_{max}^{app}$-
$K_M^{app}$-
LB 기울기LB slope-
파란 선은 저해제가 없는 경우, 빨간 선은 저해제가 있는 경우이다. 기본값은 urease의 $V_{max}=1.33$ mol/(dm³ s), $K_M=0.0266$ mol/dm³(Example 9-2)이고, 저해 식은 교재의 식 (9-38)부터 (9-42)를 쓴다. 마름모는 두 축 절편이다. 경쟁은 y절편이 같고, 비경쟁은 x절편이 같으며, 반경쟁은 두 절편이 모두 다르고 직선이 평행하다.Blue is without inhibitor and red with inhibitor. Defaults are the urease values $V_{max}=1.33$ mol/(dm³ s) and $K_M=0.0266$ mol/dm³ (Example 9-2); the inhibited rate laws are the textbook's Eqs. (9-38) to (9-42). Diamonds mark the axis intercepts. Competitive keeps the y-intercept, noncompetitive keeps the x-intercept, and uncompetitive changes both intercepts with parallel lines.
Figure 9.4Lineweaver-Burk 데이터로 저해 유형과 $K_I$ 정하기Identifying the Inhibition Type and $K_I$ from Lineweaver-Burk Data
예측: 경쟁 저해제를 넣으면 Lineweaver-Burk 직선은 어떻게 달라질까?Predict: how do Lineweaver-Burk lines change when a competitive inhibitor is added?
목표: 숨겨진 데이터(빨간 점, $C_I=1.0$ mmol/dm³)에 맞는 저해 유형을 고르고, 그림을 위아래로 끌어 모델 직선을 점에 맞춘 뒤 판정을 누르세요. $K_I$는 정답의 15% 안이어야 합니다.Goal: choose the inhibition type that fits the hidden data (red points, $C_I=1.0$ mmol/dm³), drag the plot up and down to fit the model line to the points, then press Check. $K_I$ must be within 15% of the true value.
선택한 모델Chosen model-
$K_I$ (mmol/dm³)-
점과의 상대 오차Relative misfit-
파란 점은 저해제가 없는 데이터이고 $V_{max}=1.33$, $K_M=0.0266$으로 고정했다. 빨간 점 6개는 숨겨진 유형과 $K_I$로 만든 값에 4% 이내의 무작위 오차를 더한 것이다. 세 모델 중 어느 직선이 빨간 점 전체를 지나는지가 유형을 정한다. 한 모델로 한 점만 맞추고 나머지가 어긋나면 그 유형이 아니다.Blue points are the uninhibited data with $V_{max}=1.33$ and $K_M=0.0266$ fixed. The six red points come from the hidden type and $K_I$ with random scatter within 4%. The type is the model whose line passes through all red points; if a model fits one point but misses the rest, it is not the type.
Section 9.4
생물 반응기와 세포 성장Bioreactors and Cell Growth
회분 반응기에서 세포 수는 네 단계를 거친다. 1단계 lag phase에서는 세포가 새 환경에 맞는 수송 단백질과 효소를 합성하느라 농도가 거의 늘지 않는다. 2단계 exponential growth phase에서는 성장 속도가 세포 농도에 비례한다. 3단계 stationary phase에서는 영양분 고갈로 순성장 속도가 0이다. 4단계 death phase에서는 독성 부산물과 영양분 부족으로 살아 있는 세포가 줄어든다. 페니실린 같은 항생제의 상당수는 stationary phase에서 만들어진다.In a batch reactor the cell population goes through four phases. In the lag phase (I) cells synthesize transport proteins and enzymes for the new environment and the concentration barely rises. In the exponential growth phase (II) the growth rate is proportional to cell concentration. In the stationary phase (III) nutrient depletion makes the net growth rate zero. In the death phase (IV) toxic by-products and lack of nutrients reduce the live cells. Many antibiotics, including penicillin, are produced in the stationary phase.
가장 널리 쓰는 성장 속도식은 Monod 식이다. 비성장 속도 $\mu$는 제한 영양분(substrate) 농도 $C_s$에 대해 Michaelis-Menten 식과 같은 형태이며, $K_s$가 작으면 $r_g\approx\mu_{max}C_c$가 된다. 대장균의 포도당 성장에서 $\mu_{max}=1.3$ h⁻¹, $K_s=2.2\times10^{-5}$ g/dm³이다. 사멸 속도는 $r_d=(k_d+k_tC_t)C_c$이고 $k_d$는 0.1 h⁻¹부터 0.0005 h⁻¹까지이다. 세포 배가 시간은 세균이 15분부터 1시간, 효모가 45분부터 2시간이다.The most widely used growth law is the Monod equation. The specific growth rate $\mu$ has the same form as the Michaelis-Menten equation in the limiting nutrient (substrate) concentration $C_s$, and for small $K_s$ it reduces to $r_g\approx\mu_{max}C_c$. For E. coli on glucose, $\mu_{max}=1.3$ h⁻¹ and $K_s=2.2\times10^{-5}$ g/dm³. The death rate is $r_d=(k_d+k_tC_t)C_c$ with $k_d$ from 0.1 to 0.0005 h⁻¹. Doubling times are 15 minutes to 1 hour for bacteria and 45 minutes to 2 hours for yeast.
화학양론은 수율 계수(yield coefficient)로 나타낸다. $Y_{c/s}=\Delta C_c/(-\Delta C_s)$는 소비한 기질 질량당 생긴 세포 질량이며 대표값은 0.4 g/g이다. 기질은 성장, 생성물 생성, 세포 유지(maintenance, $m\approx0.05$ h⁻¹)에 쓰인다. 유지를 무시하면 $C_c=Y_{c/s}(C_{s0}-C_s)$이다. 생성물이 성장 단계에서만 생기면 $r_p=Y_{p/c}r_g$이고, stationary phase에서는 보조 영양분 소비에 연결된다. 두 경우를 한 식으로 묶은 것이 Luedeking-Piret 식 $r_p=(\alpha\mu+\beta)C_c$이다.Stoichiometry is expressed by yield coefficients. $Y_{c/s}=\Delta C_c/(-\Delta C_s)$ is the mass of cells formed per mass of substrate consumed, typically 0.4 g/g. Substrate is used for growth, product formation and cell maintenance ($m\approx0.05$ h⁻¹). Neglecting maintenance, $C_c=Y_{c/s}(C_{s0}-C_s)$. If product forms only during growth, $r_p=Y_{p/c}r_g$; in the stationary phase product formation is tied to consumption of a secondary nutrient. The Luedeking-Piret equation $r_p=(\alpha\mu+\beta)C_c$ combines both cases.
수율 계수: $Y_{s/c}=1/Y_{c/s}$이다. $Y_{c/s}=0.4$이면 세포 1 g을 만들려면 기질 2.5 g이 필요하다.Yield coefficients: $Y_{s/c}=1/Y_{c/s}$. For $Y_{c/s}=0.4$, making 1 g of cells needs 2.5 g of substrate.
성장 억제: 포도당에서 에탄올을 만드는 발효에서는 생성물이 성장을 억제한다. 경험식은 $r_g=k_{obs}\,[\mu_{max}C_sC_c/(K_s+C_s)]$이고 $k_{obs}=(1-C_p/C_p^*)^n$이다. 대표값은 $n=0.5$, $C_p^*=93$ g/dm³이다.Growth inhibition: in glucose-to-ethanol fermentation the product inhibits growth. The empirical form is $r_g=k_{obs}\,[\mu_{max}C_sC_c/(K_s+C_s)]$ with $k_{obs}=(1-C_p/C_p^*)^n$, typically $n=0.5$ and $C_p^*=93$ g/dm³.
Figure 9.5회분 반응기에서 세포, 기질, 생성물 농도의 시간 변화Cell, Substrate and Product Concentrations in a Batch Reactor
$\mu_{max}$ (h⁻¹)-
$K_s$ (g/dm³)-
lag 시간 (h)Lag time (h)-
$C_{s0}$ (g/dm³)-
$k_d$ (h⁻¹)-
초기 배가 시간 (h)Initial doubling time (h)-
최대 세포 농도 (g/dm³)Peak cell conc. (g/dm³)-
기질 고갈 시각 (h)Substrate depleted at (h)-
식 (9-51)부터 (9-53), (9-59), (9-63), (9-67)을 Euler 방법($\Delta t=0.02$ h)으로 적분했다. $Y_{c/s}=0.4$, $m=0.05$ h⁻¹, $Y_{p/c}=0.3$, $C_{c0}=0.05$ g/dm³는 예시 값이다. lag는 적응 인자 $1-e^{-3t/\tau}$로, 고갈 후 사멸은 시간 상수 3 h로 서서히 시작하도록 근사했다. 세포 농도는 로그 눈금(왼쪽 축)이고 기질과 생성물은 선형 눈금(오른쪽 축)이다.Eqs. (9-51) to (9-53), (9-59), (9-63) and (9-67) are integrated by the Euler method ($\Delta t=0.02$ h). $Y_{c/s}=0.4$, $m=0.05$ h⁻¹, $Y_{p/c}=0.3$ and $C_{c0}=0.05$ g/dm³ are illustrative values. The lag is approximated by an adaptation factor $1-e^{-3t/\tau}$, and death after depletion is approximated to begin gradually with a 3 h time constant. Cells use the log axis (left); substrate and product use the linear axis (right).
Section 9.4.5 - 9.4.7
Chemostat, 정상 상태 운전과 washoutChemostat, Steady-State Operation and Wash-Out
Chemostat은 미생물이 들어 있는 CSTR이다. 운전자는 공급 유량으로 세포 성장 속도를 조절한다. 유입 유량과 유출 유량이 같고 살아 있는 세포가 유입되지 않으면, 희석 속도(dilution rate) $D=v_0/V=1/\tau$로 세포와 기질의 물질수지가 정해진다. 사멸을 무시한 정상 상태에서 세포 수지는 $\mu=D$를 준다. 곧 비성장 속도를 $D$로 지정할 수 있다.A chemostat is a CSTR containing microorganisms. The operator sets the cell growth rate through the feed flow rate. With equal inlet and outlet flow and no live cells in the feed, the dilution rate $D=v_0/V=1/\tau$ enters the cell and substrate balances. With death neglected, the steady-state cell balance gives $\mu=D$; the specific growth rate is set by choosing $D$.
$D$를 올리면 기질 농도는 올라가고 세포 농도는 내려간다. 세포 수지 $dC_c/dt=(\mu-D)C_c$에서 $D>\mu$이면 $C_c$가 계속 줄어 세포가 모두 빠져나간다. 이것이 washout이고 시작 조건은 $D_{max}=\mu_{max}C_{s0}/(K_s+C_{s0})$이다. 세포 생산 속도 $DC_c$는 $D=0$과 $D=D_{max}$에서 0이므로 그 사이 $D_{maxprod}$에서 최대가 된다. 이 점이 연속 발효의 최적 운전 조건이다.Raising $D$ raises the substrate concentration and lowers the cell concentration. From $dC_c/dt=(\mu-D)C_c$, if $D>\mu$ then $C_c$ keeps falling until all cells are washed out. This is wash-out, and it starts at $D_{max}=\mu_{max}C_{s0}/(K_s+C_{s0})$. The cell production rate $DC_c$ is zero at $D=0$ and at $D=D_{max}$, so it has a maximum at $D_{maxprod}$ between them, the optimum operating condition for continuous fermentation.
생성물 생산 속도: 성장에 연동된 생성물이면 $C_p=Y_{p/c}C_c$이므로 생성물 생산 속도 $DC_p$의 최댓값도 $DC_c$와 같은 $D$에서 나온다.Product formation rate: for a growth-associated product $C_p=Y_{p/c}C_c$, so the maximum of $DC_p$ occurs at the same $D$ as the maximum of $DC_c$.
Figure 9.6Chemostat의 희석 속도에 따른 세포 농도, 기질 농도, 세포 생산 속도Cell Concentration, Substrate Concentration and Cell Productivity versus Dilution Rate
예측: 희석 속도 $D$를 $\mu_{max}$ 가까이 올리면 세포 생산 속도 $DC_c$는 어떻게 될까?Predict: as the dilution rate $D$ is raised toward $\mu_{max}$, what happens to the cell productivity $DC_c$?
목표: 오른쪽 그래프를 좌우로 끌어 $D$를 바꾸고, 세포 생산 속도 $DC_c$를 최댓값의 97% 이상으로 맞추세요. $D$가 $D_{max}$를 넘으면 세포가 빠져나가는 것도 확인하세요.Goal: drag the right-hand plot left and right to change $D$, and bring the cell productivity $DC_c$ to at least 97% of its maximum. Also push $D$ past $D_{max}$ to watch the cells wash out.
$K_s$ (g/dm³)-
$C_{s0}$ (g/dm³)-
$D$ (h⁻¹)$D$ (h⁻¹)-
$C_c$ (g/dm³)-
$C_s$ (g/dm³)-
$DC_c$ (g/(dm³ h))-
상태State-
$\mu_{max}=1.0$ h⁻¹, $Y_{c/s}=0.4$ g/g는 예시 값이고 $K_s$와 $C_{s0}$는 슬라이더로 바꾼다. 그래프의 곡선은 정상 상태 식 (9-88)부터 (9-96)이고 점은 같은 식의 미분 형태를 시간에 따라 적분한 현재 상태이다. $D$를 바꾼 직후에는 점이 곡선을 따라 이동하는 과도 상태를 보인다. $DC_c$의 최댓값은 $D_{max}$보다 약간 낮은 $D_{maxprod}$에서 나온다.$\mu_{max}=1.0$ h⁻¹ and $Y_{c/s}=0.4$ g/g are illustrative; $K_s$ and $C_{s0}$ are set by the sliders. The curves are the steady-state Eqs. (9-88) to (9-96); the dots are the current state from time-integrating the unsteady balances. Right after $D$ changes, the dots show the transient moving toward the curves. The maximum of $DC_c$ lies at $D_{maxprod}$, slightly below $D_{max}$.
Self-Check
확인 문제Quiz
Q1. Azomethane 분해에서 농도가 매우 높을 때($k_2C_{\mathrm{AZO}}\gg k_3$) 속도식의 겉보기 차수는?Q1. In azomethane decomposition at very high concentration ($k_2C_{\mathrm{AZO}}\gg k_3$), what is the apparent order of the rate law?
$r=k_1k_3C^2/(k_3+k_2C)$에서 분모가 $k_2C$로 정해지면 $r\approx(k_1k_3/k_2)C$이다. 활성화된 분자가 분해하기 전에 충돌로 대부분 비활성화되어 $\mathrm{AZO}^*$와 AZO가 거의 평형을 이루므로 1차이다.When the denominator of $r=k_1k_3C^2/(k_3+k_2C)$ is dominated by $k_2C$, $r\approx(k_1k_3/k_2)C$. Most activated molecules are deactivated by collision before they decompose, so $\mathrm{AZO}^*$ and AZO are nearly in equilibrium and the order is one.
Q2. 저해제 농도를 올리자 Lineweaver-Burk 직선들이 x축 위 같은 점 $-1/K_M$에서 만나고 기울기와 y절편이 모두 커졌다. 저해 유형은?Q2. As the inhibitor concentration rises, the Lineweaver-Burk lines meet at the same point $-1/K_M$ on the x-axis while slope and y-intercept both grow. What is the inhibition type?
비경쟁 저해의 식은 $1/(-r_S)=(1+i)(1/V_{max})(1+K_M/C_S)$이므로 기울기와 y절편이 모두 $(1+i)$배가 되고 $K_M$은 그대로이다. 경쟁 저해는 y절편이 고정되고, 반경쟁 저해는 직선이 평행하다.For noncompetitive inhibition, $1/(-r_S)=(1+i)(1/V_{max})(1+K_M/C_S)$, so both slope and y-intercept grow by $(1+i)$ and $K_M$ is unchanged. Competitive keeps the y-intercept fixed, and uncompetitive gives parallel lines.
Q3. $\mu_{max}=1.0$ h⁻¹, $K_s=0.2$ g/dm³, $C_{s0}=20$ g/dm³인 chemostat을 $D=1.05$ h⁻¹로 운전하면 정상 상태에서 어떻게 되는가?Q3. A chemostat has $\mu_{max}=1.0$ h⁻¹, $K_s=0.2$ g/dm³ and $C_{s0}=20$ g/dm³. What happens at steady state when it is run at $D=1.05$ h⁻¹?
$D_{max}=\mu_{max}C_{s0}/(K_s+C_{s0})=1.0\times20/20.2=0.99$ h⁻¹이다. $D=1.05$는 이보다 크므로 $\mu(C_{s0})$D_{max}=\mu_{max}C_{s0}/(K_s+C_{s0})=1.0\times20/20.2=0.99$ h⁻¹. Since $D=1.05$ exceeds this, $\mu(C_{s0})
What If
조건을 바꾸면What If?
효소 농도 $E_t$를 두 배로 하면 $V_{max}$와 $K_M$은 어떻게 되는가?If the enzyme concentration $E_t$ doubles, what happen to $V_{max}$ and $K_M$?
클릭해서 확인하세요 →
$V_{max}=k_3E_t$가 두 배가 되고 $K_M=(k_2+k_3)/k_1$은 변하지 않는다. Lineweaver-Burk 그래프에서 y절편은 반으로 줄고 x절편은 그대로이다.$V_{max}=k_3E_t$ doubles while $K_M=(k_2+k_3)/k_1$ is unchanged. On a Lineweaver-Burk plot the y-intercept halves and the x-intercept stays.
경쟁 저해제가 있을 때 기질 농도를 매우 높이면 속도는?With a competitive inhibitor, what is the rate at very high substrate concentration?
클릭해서 확인하세요 →
$C_S\gg K_M(1+i)$에서 $-r_S\to V_{max}$이다. 기질이 저해제를 활성 부위에서 밀어내므로 저해가 극복된다. 반경쟁과 비경쟁 저해는 이렇게 되지 않는다.For $C_S\gg K_M(1+i)$, $-r_S\to V_{max}$. Substrate displaces the inhibitor from the active site, so the inhibition is overcome. Uncompetitive and noncompetitive inhibition do not behave this way.
$k_2/k_1=2$인 $A\to I\to P$에 PSSH를 쓰면 정상 구간에서 $C_I$ 오차는?For $A\to I\to P$ with $k_2/k_1=2$, how large is the PSSH error in $C_I$ in the quasi-steady region?
클릭해서 확인하세요 →
정확해와 PSSH 해의 비가 $r/(r-1)=2$로 수렴하므로 오차는 100%이다. 중간체가 반응물보다 빠르게 소모된다는 가정이 성립하지 않는다.The exact-to-PSSH ratio converges to $r/(r-1)=2$, so the error is 100%. The assumption that the intermediate is consumed much faster than it forms does not hold.
공급 기질 농도 $C_{s0}$를 올리면 $D_{max}$와 최적 $D$는?If the feed substrate concentration $C_{s0}$ rises, what happen to $D_{max}$ and the optimal $D$?
클릭해서 확인하세요 →
두 값 모두 $\mu_{max}$ 쪽으로 올라간다. $C_{s0}\gg K_s$이면 $D_{max}\to\mu_{max}$이고 $D_{maxprod}\to\mu_{max}$이며, $C_{s0}$가 클수록 세포 농도의 상한 $Y_{c/s}C_{s0}$도 커진다.Both rise toward $\mu_{max}$. For $C_{s0}\gg K_s$, $D_{max}\to\mu_{max}$ and $D_{maxprod}\to\mu_{max}$, and the upper limit of cell concentration $Y_{c/s}C_{s0}$ also grows with $C_{s0}$.
Key Takeaways
01
PSSH로 중간체를 소거한다Eliminate the intermediate with the PSSH
Active intermediate의 순생성 속도를 0으로 놓고 그 농도를 반응물 농도로 풀면 비기본 속도식이 나온다. 중간체 소모가 생성보다 충분히 빠를 때만 맞는다.Set the net formation rate of the active intermediate to zero and solve for its concentration to get the nonelementary rate law. It holds only when consumption is much faster than formation.
02
Michaelis-Menten 식과 두 매개변수Michaelis-Menten equation and its two parameters
$-r_S=V_{max}C_S/(K_M+C_S)$에서 $V_{max}=k_3E_t$이고 $K_M$은 속도가 절반일 때의 기질 농도이다. Lineweaver-Burk 그래프의 절편과 기울기로 구한다.In $-r_S=V_{max}C_S/(K_M+C_S)$, $V_{max}=k_3E_t$ and $K_M$ is the substrate concentration at half rate. Both come from the intercepts and slope of a Lineweaver-Burk plot.
03
저해 유형은 직선이 만나는 위치로 구별한다Inhibition type shows where the lines meet
경쟁은 y절편이 같고, 반경쟁은 직선이 평행하며, 비경쟁은 x절편이 같다. 경쟁 저해만 기질 농도를 높여서 극복할 수 있다.Competitive keeps the y-intercept, uncompetitive gives parallel lines, and noncompetitive keeps the x-intercept. Only competitive inhibition can be overcome with more substrate.
04
Chemostat은 D로 성장 속도를 정한다The chemostat sets growth rate with D
정상 상태에서 $\mu=D$이다. $D>D_{max}=\mu_{max}C_{s0}/(K_s+C_{s0})$이면 washout이 일어나고, 세포 생산 속도 $DC_c$는 그보다 낮은 $D_{maxprod}$에서 최대이다.At steady state $\mu=D$. Wash-out occurs for $D>D_{max}=\mu_{max}C_{s0}/(K_s+C_{s0})$, and the cell production rate $DC_c$ peaks at a lower $D_{maxprod}$.